Best WPC/PVC Board Manufacturer in India


It is an intelligent solution which has emerged as a substitute of wood and wood,plywood products, fulfilling the demands that are not in the scope of wood.

WPC/PVC Board is a modern and ecological composite material which is made of 60% PVC, 30% rice & wheat husk and 10% calcium carbonate and additives. It is the best substitute of Plywood because of its strength and durability. The major advantage of WPC/PVC Board lies in the fact that it retains the best properties of wood while eliminating all the downsides which one may face with woods.

For decades we have been cutting down trees to fulfil our need and demand of building products. The cost of the products made from plywood is too high. Along with the cost constraint there is limitation of colours available as well and the durability is also low. It is a versatile material with multitude application area. We can make all types of furniture using WPC/PVC Board like Modular furnishing, Bathroom vanities ,kitchen , cabinets , interior, partitioning ,shoe rack,wardrobes, cupboards, tables, chairs and any type of interior and exterior furniture.

WPC Boards

Why Wood Polymer Composite is the best replacement of
Plywood and Wood Products :

WPC/PVC Board is a revolutionary replacement for the wooden home construction products: It’s made up of wood polymer composite boards Material. The Wood deteriorates, cracks, rots fall under the category of organic material, which automatically makes it a breeding ground for bacteria and a hearty meal for the termites to latch on. The other reason why wood must be avoided is due to the fact that wood cannot be recycled, and cutting down of trees is harmful for our environment and leads to deforestation. WPC/PVC on the other hand, combines the properties of wood and Plastic, making it a highly durable and malleable material. Along with other advantages, WPC/PVC Boards is resistant to moisture, rotting, corrosion, aging, acid and chemical. It can both be polished and painted to match the shade of the door and wall well. The frames are available in different length and width.

WPC Boards

Switching to wood polymer composite board is a
sustainable and lucrative alternate:

  • It is a complete substitute for Plywood and Water Proof Ply.
  • It is an environment-friendly option since no cutting down of trees is required which essentially saves the home of plenty of birds and animals.
  • WPC/PVC Board is a low-maintenance product. The furniture prepared from WPC/PVC doesn’t require waxing, oil-coating, or any other treatment. They are color-fast and do not change their shape over time.
  • WPC/PVC Board loves water and is moisture-proof, durable, and firm. They are environmentally friendly and fully recyclable. They are the perfect substitutes for wood.

The material can be well machined with utilizing standard processing equipment, making it as versatile as wood. Like plastic, the sheets are suitable for thermo processing i.e. they combine the benefits of both materials in a single product.

Alstone WPC/PVC Boards is resistant to external influences, like snow, rain, salt water, sun, etc. It is a famous and very well well-usedrnative to the tropical timber, this whichs it stands in line as the protection of valuathe ble natural resource. The material used in Alstone Industries shows no sign of swelling, unlike conventional wood. The product is a well-known UV-resistant product which makes it very useful.

WPC Board

Due to the unique properties of the base material, Alstone WPC/PVC Board offers advantages as compared to wood:

  • The material doesn’t administer any discoloration of the surface.
  • There happens to be no resin discharge of any form.
  • No surface erosion takes place due to any environmental influences.
  • No cracks are administered due to shrinkage or swelling.
  • No front-face capillary action

Alstone WPC/PVC Board is primarily based on natural raw materials. As a result of the special production method and composition of Alstone WPC/PVC Board some tiny air pockets may be formed. The differences in coloration and surface finish of individual sheets is very much possible. This color difference has no effect on the quality of the product. Due to the durability as well as the reduction of maintenance which is aided by Alstone Industries makes it recyclable and easy to use. It offers a significant advantage as compared to the conventional building materials. Alstone WPC/PVC Board is the perfect choice for projects in which the key requirement holds as sustainability.

WPC Boards


Alstone Industries is particularly suited to areas of application that rely on durable, sustainable and weather-proof materials with a wood like appearance.

The area of application is found in various domains:

  • Outdoor furniture
  • Wall and façade elements
  • Interiors
  • Store fit-outs
  • Exhibition stands
  • Partitions

Advantage of using WPC/PVC Board

  • 100% Water Proof
  • 100% Termite Proof
  • 100% Fire Retardant
  • Durably water and weather resistant. It doesn’t swell and can be installed in water as well.
  • Resistant against salt and chlorinated-water
  • UV-resistant, WPC/PVC won’t fade away or turn yellow under the influence of sun.
  • Skid-resistant, it is ideal for pool decks and terraces.
  • Free from cracks and splinters.
  • Resistance against fungal and mold decay.
  • Resistance against termites and other parasites.
  • Products partially fulfill very high fire classes
  • Sustainable and recyclable.


Alstone, a key player in this sector, focuses on supplying excellent quality WPC/PVC boards. Elevate Your Space with Alstone WPC/PVC, Superior Quality, Endless Flexibility & Eco-Friendly Excellence. Formed from the mix of woods’ fibres and the recycled plastics gives the material the looks of the nature wood but possesses the high wearer resistance and minimum care.

Since Alstone is committed to innovations, its products dominate on eco-friendly construction materials. Alstone WPC/PVC Sheet Manufacturers that are not susceptible to moisture problems, pest infestation and UV light. In addition, WPC/PVC sheets can be used in many applications like decking, cladding, indoor designing and so on. Alstone provides top-grade quality, and its products reflect the increasing awareness towards green building techniques. Customers can therefore go green with Alstone WPC/PVC sheets by having great aesthetics and performance as well.

WPC Board


Alstone WPC Board are made to look and feel just like wood. The material can be machined with standard processing equipment,making it as versatile as wood. What is more, like plastic,the sheets are suitable for thermoprocessing i.e. they combine the benefits of both materials in a single product.

Alstone Industries WPC Board is highly resistant to external influences such as sun,rain,snow or salt water, and as an alternative to tropical timber it also contributes to the protection of valuable natural resources. In contrast to conventional wood or wood based products, the material used in Alstone WPC Board shows no sign of swelling. Furthermore it is UV resistant.

unique properties of the base material, Alstone Industries offers many advantages compared to wood:

  • No discolouration of surfaces due to chemical decomposition or leaching of timber components.
  • No resin disc harge
  • No surface erosion due to environmental inf luences.
  • No cracks due to swelling or shrinkage.
  • No front-face capillary action

Alstone Industries is primarily based on natural raw materials. As a result of the special production method and composition of Alstone WPC Board some tiny air pockets may be formed. Differences in the colouration and surface finish of individual sheets are also possible, but this has no effect on the quality of the product. Due to its specific material properties and durability as well as associated reduction in maintenance and servicing cost stogether with its recyclability ,Alstone WPC Boards offers significant advantages compared to conventional building materials when it comes to life cycle costs (‘cradle to cradle”). This makes Alstone Industries the perfect choice with regard to projects in which sustainability is a key requirement.


Alstone WPC Board is particularly suited to areas of application that rely on durable, sustainable and weather-proof materials with a wood like appearance.

Possible areas of use:

  • Outdoor furniture
  • Wall and facade elements
  • Interiors
  • Store fit-outs
  • Exhibition stands
  • Partitions


Alstone WPC Board are produced by means of the extrusion method. Sheet extrusion is a thermoplastic processing method.
A board extrusion plant consists of an extruder,a tool sometimes referred to as a die with a fishtail design for shaping purposes, a triple roller calendar to smooth the extruded material, a cooling section, a haul-off and a separating unit (saw or cutting device) and a destacker.

By applying heat, shearing and pressure, the raw material is heated during the extrusion process to convert it into a viscious fluid form. A rotating screw presses this molten material through a shaping tool-fishtail nozzle. The surface of the calendar rollers generally has a highgloss finish. It essentially determines the surface quality of the sheet. The shaping process is complete once the calendar has performed its smoothening task. After the extruded material has cooled down on the roller conveyor, sheets are produced by being cut to the desired length in the separating unit before being off-loaded onto transport pallets by the destacker. As the material meets the aforementioned requirements, Alstone Industries IM is suitable for boat- and ship building purposes and can be used on bulkheads, walls, ceilings, linings or floor coverings. In the event of a fire, hydrogen chloride gas and other broken down byproducts may be released. For this reason, Alstone WPC Boards should not be burnt without taking suitable emission control precautions. Offcuts and/or sanding dust, as with any other thermo plastic material,should be properly disposed of. Please follow the instructions of your local disposal expert.

Performance in outdoor use

Alstone WPC Board is extremely resistant to external influences such as sun, rain, snow, or salt water. As the Alstone WPC  Hybrid material is also UV resistant, Alstone Industries is suitable for outdoor use. For optimal protection and to avoid bleaching of the material due to natural causes, we generally recommend the application of a varnish or sealant.
Temperature changes can alter the dimensions of any material. For this reason, the thermal expansion coefficient should be taken Into account when cutting and assembling Alstone WPC Board. The thermal expansion coefficient of plastics is significantly greater than that of metal or wood and must therefore- be taken Into account when Alstone WPC is used in areas that are subject to a high degree of temperature fluctuation.

Cutting and assembly of the Alstone WPC Board should be completed under stable temperature conditions. It is recommended that the material is stored in the shade or in areas with no direct sunlight before being cut or assembled, as the material can significantly heat up in the sun and expand accordingly. We recommend storing the product for at least 24 hours at a consistent temperature that corresponds to that of the subsequent area of application. Apart from its composition, the processing method, handling conditions, and design of the finished product, as well as the resultant tension exerted on it, will have an effect on the lifespan of the material. The latter is also influenced by ambient conditions as well as strains and stresses exerted during installation and processing.


Due to the smooth surface, the organic constituents on the surface of the product can never absorb moisture. However, water can penetrate into open pores. Water absorbed in this way does not initiate any rotting processes; it can be released again during drying.

Temperature Range

ALSTONE WPC Board is based on a thermoplastic material and therefore displays the usual properties of a thermoplastic when exposed to higher temperatures. In the case of parts not subject to mechanical wear and tear, we, therefore, recommend a maximum operating temperature of 65 Degrees Celsius. Depending on the level of wear and tear, the maximum operating temperature may be lower than 65 degree Celsius.


Alstone Industries does not act as a food source for:
  • Microorganisms
  • Bacteria
  • Mould (fungi that discolor or destroys wood)
  • Gnawing insects

Depending on the environment in which it is used, organic residues may be deposited on Alstone WPC Board. These are the ideal breeding ground for the kind of fungal spores naturally present in the ambient air and may lead to staining. However, the material itself will not deteriorate as a result. For optimal protection, we recommend cleaning Alstone wpc where required and removing any organic residues ( eg. Leaves or foliage)


Alstone Industries offcuts and /or sanding dust should be properly disposed of, as with any other thermoplastics. Please follow the instructions of your local disposal expert. In the event of a fire, hydrogen chloride gas and broken down by-products may be released. For this reason, Alstone WPC Boards should not be burnt without taking suitable emission control precautions.

  • Machining
  • Drilling

Alstone WPC Board can be drilled using standard spiral drills. No special grinding Is generally required. However, we do recommend the use of drill bits with relief ground cutting edges and small twist angles. if the rake angle of the bit has been negatively ground for drilling holes, it prevents the bit from jamming and the material from breaking. This Is recommended up to a drill hole depth of approx. 15 mm. If the drill hole Is longer than 5 x a, it is advisable to withdraw the bit from the hole a number of times in order to extract the shavings efficiently. If the drill hole is more than 10 mm in diameter, pre-drilling is to be recommended. Drill holes exceeding 20mm in diameter can be created more efficiently using double–edged bits with a pilot, while drill holes exceeding 40mm in diameter are best made with circle cutters. The use of Forstner bits is also possible.

Drilling chart

Cutting speed and forward feed depends on the depth of the drill hole. If the proper processing parameters are observed, no smearing of the material will occur.


All standard milling machines used in metal machining and designed for high speeds are suitable. High cutting speeds and small cutting depths are recommended.


The edges can be planed with the usual tools and conventional planning and thickness planning machines. Manual files and handheld electric planers can also be used to dress the sheets.



Alstone WPC Board can be cut lengthwise and crosswise with all the usual sawing equipment.

Circular Saws

To achieve clean cutting edges, the saw blade should only project slightly beyond the Alstone WPC Board in each case. The use of carbide-tipped saw blades improves cutting performance and quality, while also considerably extending the tool life of the saw blade. We recommend using saw blades with small tooth pitches to cut through Alstone WPC Boards (eg. Saw blade 220mm 0. , with approx. 88 teeth) Circular saws table

Band saws

Due to its rotating saw band, heat dissipation is more efficient when a band saw is used. The saw bands must be sharp and set correctly in order to achieve a clean cut.

Band saws table


Alstone WPC Boards comes smooth on both side as standard. To give the look and feel of wood, sanding of the finished product is necessary. Sanding may be done by hand or with suitable sanding machines (e.g. belt sanders), but in any event the sheets should always be sanded In the same direction (cross-wise or lengthwise). Depending on the desired surface finish, we recommend the use of sandpaper w ith a grain of 24 to 60. It Is best to begin with a coarse grain paper, followed by progressively finer sand paper until a smooth surface is achieved. Finer sandpaper should only be used to remove surface dirt. The look and feel of wood may not be achieved if the sand paper is too fine or the product is sanded using a circular motion. However, this will have no adverse effect on the quality of the product. For optimal protection of the finished surface, we recommend application of a sealant.


We recommend appropriate pre-drilling for all screw diameters.To minimise the risk of breaking around the edges,the minimum distance of 20 mm from any edge should be maintained for all screws. As a rule, the use of flathead screws is recommended.When using flat-head screws, they should be countersunk so the material is not put under pressure. Lower-stress joining can be achieved with the help of special plastic screws. Here, too, pre-drilling is esse ntial. flor further info rmation, please refer to documentation provided by the respective suppliers of screws.

In application areas prone to tempe rature f luctuation, the thermal expansion coeff icient should be taken into account. In this case, a larger drill hole and the use of so-called plumber screws (screws with washers) may be advisable.


We do not recommend driving any /nails into Alstone WPC Boards as this may lead to cracking or breaking of the sheets. Even predrilling the nail holes will not rule out the chance of tension cracks appearing. Depending on the specific field of application, we recommend testing the proposed method on sample sheets.


Alstone WPC Boards can be glued. Due to the host of different gluing agents available and the various options for gluing Alstone WPC Boards to different kinds of surface materials, we recommend con ducting preliminary tests on sample sheets. Good results can be expected from glues (from various manufacturers) suitable for hard plastics (rigid PVC/PVC-U) .They include, for example, STPU (hybrid) adhesives, one-part adhesives and twocomponents PU/PUR adhesives as well as polyester and epoxy resins. When using adhesives it is also advisable in many cases to pre-treat the substrate with a cleaning agent or primer. For other material combinations, please speak to your pre ferred adhesive supplier or contact our Technical Service Centre. We work in close cooperation with other wellknown producers of adhesives and are committed to reviewing our knowledge continuously as regards Alstone WPC Board bonding by means of adhesives. Depending on the application area, the following points are important when gluing:

  • Gluing of the sheets prior to mounting Application of
  • Application of pressure to the adhesive seam
  • Hydrolytic stability of the adhesive
  • Temperature of application
  • Pot life
  • Thickness of the adhesive bond
  • Clean and grease free surface

In all cases, please always refer to the technical data sheets of the respective manufacturers.


The linear bending zone of an Alstone WPC Boards can be heated in various ways on one or both sides:

  • Without contact
  • With heaters (infrared or quartz heaters)
  • With glow wires or heating rods
  • With a hot air blower

General advice on storage of Alstone WPC Boards Storage should be in a suitable building, free of any moisture, temperature swings or direct sunlight. Any packaging straps should be released as soon as possible after the delivery. If Alstone WPC is replaced, steel bands should be avoided wherever and whenever possible. Unilateral heating by any heat source must be avoided. Sufficient ventilation of the material must be ensured. To avoid foxing or mould stains, the material should not be wrapped in plastic film. The sheets must be stored on a stable level and on a well-supported pallet that is at least as large as the size of the sheets. Individual sheets should be stored flat and lying down. An intermediate layer (e.g. cardboard) between the pallet and the semi-finished plastic product is recommended. In case block storage of several pallets is involved, we recommend using one pallet ''head first'' as an interim layer between each pallet to ensure the weight is evenly distributed.

Dimensions 4x8 Ft
Colors Frosty White & Natural Wood
Thickness 4mm, 6mm, 8mm, 12mm , 16mm, 18mm , 25mm , 30mm , 35mm, 40mm, 45mm , 50mm, 60mm